Notes when Trailer Hydraulic Brake is running

As a Trailer Hydraulic Backing Plate Factory, let me tell you about the characteristics of the trailer hydraulic brake.

1. The main performance is safe and reliable, the brake is stable, and the action frequency is high.

2. Asbestos-free brake pads and brake pads are inserted and inserted, which is safe and reliable, and easy and fast to replace.

3. The brake spring is arranged in a spring tube, and a brake torque scale is provided on one side for easy and intuitive adjustment.

4. The main swing hinge points are provided with self-lubricating bearings, which have high transmission efficiency and do not require lubrication during use.

5. Equipped with a chain-type equal back-off device, the back-off distance of the tiles on both sides is always kept equal during use, avoiding the phenomenon that the brake pads on one side float against the brake wheels due to the uneven back-off distance.

Trailer Hydraulic Brake

Notes when Trailer Hydraulic Brake is running：

1. Lubricant is often added to the movement of the electromagnetic brake.

2. regularly check the length of the armature stroke. Because during the operation of the brake, the stroke length of the armature will increase due to the wear of the profile. When the armature stroke length does not reach the normal value, it is necessary to adjust to restore the smallest gap between the braking surface and the turntable. If the armature stroke length increases above normal, suction may be greatly reduced.

3. If the worn brake surface is replaced, the smallest gap between the braking surface and the turntable should be properly adjusted from the beginning.

4. often check the tightening degree of the bolt, especially to tighten the bolt of the electromagnet, the bolt of the electromagnet and the shell, the bolt of the yoke, the bolt of the solenoid coil and the wiring bolt.

5. Regularly check the mechanical wear of the moving parts, and remove the dust, hair and dirt on the surface of the electromagnet parts.

Trailer hydraulic brake and pusher are two essential parts of the machine. As the name suggests the brake is a driving device that slows down or stops the machine. Because it is easy to use and has sufficient power. Mainly used in mining, wharf, construction, metallurgy and other mechanical industries. As the machine is limited due to the technical environment and other reasons, there are some requirements in the multi-working environment. Take trailer hydraulic brake as an example:

Environmental requirements for the use of Trailer hydraulic brake:

Ambient temperature: -40 ℃ ～ + 50 ℃.

Relative humidity: ≤90%.

Altitude: Comply with relevant regulations of GB755-2000.

Characteristics of Trailer hydraulic brake:

1. The performance is safe and reliable, the brake is stable, and the action frequency is high.

2. High transmission efficiency and long life, no lubrication is required during use.

3. This series of brakes can be installed according to customer needs.

4. Install the plug-in brake pads, which are safe and reliable, easy and fast to replace.

5. There is no need to adjust the interlocking equal back-off device.

Do you already have a certain understanding of the trailer hydraulic brake? I hope everyone can notice the environmental problems of the trailer hydraulic brake when using it. Our company also has Trailer Brake Assembly on sale, welcome to consult.